对位酯废水的光催化降解研究
Study on photocatalytic degradation of para-ester wastewater
-
摘要: 研究了对位酯生产废水的初步处理方案。先将对位酯废水进行中和、冷冻除盐、加CaO沉淀、过滤等预处理(预处理后COD 40.352 mg/L;SO2-4 9.577 mg/L; NH3-N 21 mg/L),再采用纳米光催化降解以及BaCl2进行处理,TiO2浓度为2 g/L时处理效果较好(COD 30.325 mg/L;SO2-4 880 mg/L ;NH3-N 140 mg/L)。废水经铁炭微电解及CaO处理后,再进行光催化降解可以达到更好的处理效果,COD降为 21.224 mg/L。废水经微电解、Fenton氧化和光催化联用处理后,COD降为20.800 mg/L。Abstract: Some initial treatment techniques for industrial wastewater from paraester production were investigated. Some pretreatment steps such as neutralization, desalination with freeze, precipitation by adding CaO, filtration were used to treat the paraester wastewater (after pretreatment COD 40.352 mg/L; SO2-4 9.577 mg/L; NH3-N 21 mg/L), then photocatalytic degradation and deposition with BaCl2 were used. When TiO2 concentration was 2 g/L, the better treatment results were observed (COD 30.325 mg/L; SO2-4 880 mg/L; NH3-N 140 mg/L). Alternatively, after the treatment of iron, charcoal, CaO and photocatalysis degradation process, the more effective results (COD 21.224 mg/L) were obtained. After the combined process of minute electrolysis, Fenton’s oxidation and photocatalysis degradation, the value of COD was further decreased to 20.800 mg/L.
-
Key words:
- para-ester /
- photocatalytic degradation /
- minute electrolysis /
- titanium dioxide
-
-

计量
- 文章访问数: 2420
- HTML全文浏览数: 1784
- PDF下载数: 1637
- 施引文献: 0