利用二维表对活性污泥工艺模拟时的流量进行平衡的方法

张发根; 程静; 姜应和

环境工程学报

, ,

张发根, 程静, 姜应和. 利用二维表对活性污泥工艺模拟时的流量进行平衡的方法[J]. 环境工程学报, 2012, 6(8): 2588-2594.

引用本文:

张发根, 程静, 姜应和. 利用二维表对活性污泥工艺模拟时的流量进行平衡的方法[J]. 环境工程学报, 2012, 6(8): 2588-2594.

Zhang Fagen, Cheng Jing, Jiang Yinghe. Method to balance flowrates for simulated activated sludge process via bivariate table[J]. Chinese Journal of Environmental Engineering, 2012, 6(8): 2588-2594.

Citation:

Zhang Fagen, Cheng Jing, Jiang Yinghe. Method to balance flowrates for simulated activated sludge process via bivariate table[J]. Chinese Journal of Environmental Engineering, 2012, 6(8): 2588-2594.

利用二维表对活性污泥工艺模拟时的流量进行平衡的方法

1.
广州大学环境科学与工程学院，广州 510006
2.
武汉理工大学土木工程与建筑学院，武汉 430070
基金项目:
国家水体污染控制与治理科技重大专项（2008ZX07317-002）
中图分类号: X703.1

Method to balance flowrates for simulated activated sludge process via bivariate table

1.
School of Environmental Science and Engineering， Guangzhou University， Guangzhou 510006， China
2.
School of Civil Engineering and Architecture， Wuhan University of Technology， Wuhan 430070， China
Fund Project:

摘要: 多点进水和多重回流成为提高活性污泥工艺去除污染物能力的常用方法，这导致活性污泥工艺流程较为复杂。对工艺进行模拟计算时，由于模拟池体数量比实际池体数量更多，流量平衡较为困难。根据工艺流程特征提出了主流线、副流线等概念，结合流量分配比、循环流量等参数，利用二维表进行流量平衡计算，简捷明了，便于检验，大大提高了进行流量平衡的准确性和效率。
- 活性污泥工艺 /
- 模拟 /
- 二维表 /
- 流量 /
- 平衡
Abstract: As a usual method to enhance pollutants removal ability of activated sludge process (ASP)， multi-site feeding and multiple flow returning lead to more complicated technological flow. When ASP is simulated， flowrates balancing becomes difficult since the module reactors are more than the real ones in number. Concepts such as main flow line and accessory one are put forward based on the character of technological flow. It is simple and clear to balance flowrates via bivariate table supported by parameters namely flowrate distribution ratio and recycling flow so that the accuracy and efficiency of flowrates balancing are improved greatly.
- activated sludge process /
- simulation /
- bivariate table /
- flowrate /
- balance

点击查看大图

计量

文章访问数: 2038
HTML全文浏览数: 1076
PDF下载数: 1074
施引文献: 0

张发根, 程静, 姜应和. 利用二维表对活性污泥工艺模拟时的流量进行平衡的方法[J]. 环境工程学报, 2012, 6(8): 2588-2594.

引用本文:

张发根, 程静, 姜应和. 利用二维表对活性污泥工艺模拟时的流量进行平衡的方法[J]. 环境工程学报, 2012, 6(8): 2588-2594.

Zhang Fagen, Cheng Jing, Jiang Yinghe. Method to balance flowrates for simulated activated sludge process via bivariate table[J]. Chinese Journal of Environmental Engineering, 2012, 6(8): 2588-2594.

Citation:

利用二维表对活性污泥工艺模拟时的流量进行平衡的方法

1. 广州大学环境科学与工程学院，广州 510006
2. 武汉理工大学土木工程与建筑学院，武汉 430070

收稿日期: 2012-03-26

基金项目:

国家水体污染控制与治理科技重大专项（2008ZX07317-002）

关键词:

活性污泥工艺 /
模拟 /
二维表 /
流量 /
平衡

摘要: 多点进水和多重回流成为提高活性污泥工艺去除污染物能力的常用方法，这导致活性污泥工艺流程较为复杂。对工艺进行模拟计算时，由于模拟池体数量比实际池体数量更多，流量平衡较为困难。根据工艺流程特征提出了主流线、副流线等概念，结合流量分配比、循环流量等参数，利用二维表进行流量平衡计算，简捷明了，便于检验，大大提高了进行流量平衡的准确性和效率。

English Abstract

Method to balance flowrates for simulated activated sludge process via bivariate table

1. School of Environmental Science and Engineering， Guangzhou University， Guangzhou 510006， China
2. School of Civil Engineering and Architecture， Wuhan University of Technology， Wuhan 430070， China

Received Date: 2012-03-26

Fund Project:

Keywords:

Abstract: As a usual method to enhance pollutants removal ability of activated sludge process (ASP)， multi-site feeding and multiple flow returning lead to more complicated technological flow. When ASP is simulated， flowrates balancing becomes difficult since the module reactors are more than the real ones in number. Concepts such as main flow line and accessory one are put forward based on the character of technological flow. It is simple and clear to balance flowrates via bivariate table supported by parameters namely flowrate distribution ratio and recycling flow so that the accuracy and efficiency of flowrates balancing are improved greatly.

全文HTML

参考文献 (0)

下载: 全尺寸图片幻灯片

返回文章

用微信扫码二维码

分享至好友和朋友圈

利用二维表对活性污泥工艺模拟时的流量进行平衡的方法

Method to balance flowrates for simulated activated sludge process via bivariate table

计量

出版历程

利用二维表对活性污泥工艺模拟时的流量进行平衡的方法

English Abstract

Method to balance flowrates for simulated activated sludge process via bivariate table

全文HTML

目录