|
[1]
|
刘文海,李秀金.粉煤灰、炉渣提高生物反应器垃圾处理性能研究.环境工程,2011,29(5):113-116 Liu Wenhai,Li Xiujin.Study on enhancing treating performance of a bioreactor by adding fly ash and cinder.Environmental Engineering. 2011,29(5):113-116(in Chinese)
|
|
[2]
|
黄鼎曦,陆文静,王洪涛.农业蔬菜废物处理方法研究进展和探讨.环境污染治理技术与设备,2002,3(11):38-42 Huang Dingxi, Lu Wenjing,Wang Hongtao.Progress on study of agricultural vegetable waste treatment. Environmental Pollution Control Technology and Equipment, 2002,3(11):38-42(in Chinese)
|
|
[3]
|
刘研萍,陈雪,朱保宁,等.餐厨垃圾厌氧消化中硬脂酸钙的行成及作用.环境工程学报,2011,5(12):2844-2848 Liu Yanping,Chen Xue,Zhu Baoning. Formation and function of calcium stearate in anaerobic digestion of food waste. Chinese Journal of Environmental Engineering,2011,5(12):2844-2848(in Chinese)
|
|
[4]
|
宋建利,石伟勇,倪亮,等.城市生活垃圾现状与资源化处理技术研究.河北农业科学,2009,13 (7):58-61 Song Jianli, Shi Weiyong,Ni Liang,et al. City life garbage status and reuse treatment technology research. Journal of Hebei Agricultural Sciences,2009,13 (7):58-61(in Chinese)
|
|
[5]
|
陈世和,诺建宇.DANO动态堆肥装置的特性研究.上海环境科学,1991,10(12):11-13 Chen Shihe,Nuo Jianyu.Research of characteristics of dynamic composting device. Shanghai Environmental Sciences, 1991,10(12):11-13(in Chinese)
|
|
[6]
|
李东风.大连城镇生活垃圾调查及生物预处理特性研究.大连:大连理工大学硕士学位论文,2008 Li Dongfeng. Dalian urban life garbage investigation and biological pretreatment characteristic research. Dalian:Master Dissertation of Dalian University of Technology,2008(in Chinese)
|
|
[7]
|
韩北忠.滚筒式生物反应器固态发酵的应用研究.中国农业大学学报,2001, 6(2): 96-100 Han Beizhong. Drum bioreactor solid state fermentation application research. Journal of China Agricultural University, 2001, 6(2): 96-100(in Chinese)
|
|
[8]
|
刘文海,李秀金.利用生物反应器处理生活垃圾试验研究.环境工程,2009,27(s1):356-360 Liu Wenhai,Li Xiujin.Research of using biological reactor processing living garbage test. Environmental Engineering, 2009,27(s1):356-360(in Chinese)
|
|
[9]
|
罗金华.卧式螺旋式污泥好氧动态堆肥装置试验研究.重庆:重庆大学硕士学位论文,2004 Luo Jinhua.Research of horizontal screw sludge aerobic dynamic compost device test. Chongqing: Master Dissertation of Chongqing University,2004(in Chinese)
|
|
[10]
|
夏建芳.回转窑剖分式滚圈结构设计与接触应力分析.现代制造工程,2008,(11):95-98 Xia jianfang. Rotary kiln split rolling ring structure design and contact stress analysis. Modern Manufacturing Engineering, 2008,(11):95-98(in Chinese)
|
|
[11]
|
周贤,刘义伦,赵先琼,等.回转窑轮带受力模型及接触应力仿真分析.中南工业大学学报,2002,33(5):526-529 Zhou Xian,Liu Yilun,Zhao Xianqiong.Rotary kiln tyre mechanical model and contact stress simulation analysis. Central South University of Technology Journal, 2002,33(5):526-529(in Chinese)
|
|
[12]
|
HG/T 20566-2011.化工回转窑设计规定.北京:中国计划出版社,2011
|
|
[13]
|
李峰,赵杰.应用ANSYS 求解赫兹接触问题.机电产品开发与创新,2006,19(6):76-78 Li Feng,Zhao Jie. Using ANSYS solve Hertz contact problem. Development & Innovation of Machinery, 2006,19(6):76-78(in Chinese)
|
|
[14]
|
陈小军.基于整体建模的回转窑支承装置强度分析及其应用软件研究.长沙:中南大学硕士学位论文,2008 Chen Xiaojun. Based on the whole modeling of the rotary kiln supporting device strength analysis and its application software research. Changsha:Master Dissertation of Central South University, 2008
|
|
[15]
|
洪元.大型回转窑支承构件滚动接触应力场和疲劳寿命研究.长沙:中南大学硕士学位论文,2007 Hong Yuan. The study of large scale rotary kiln supporting device rolling contact stress and fatigue pit's life. Changsha:Master Dissertation of Central South University, 2007(in Chinese)
|
点击查看大图
下载:
