[1] GRANT A, BRIGGS A D. Toxicity of sediments from around a North Sea oil platform:are metals or hydrocarbons responsible for ecological impacts?[J]. Marine Environmental Research,2002,53(1):95-116
[2] BAKKE T, KLUNGSØYR J, SANNI S. Environmental impacts of produced water and drilling waste discharges from the Norwegian offshore petroleum industry[J]. Marine Environmental Research,2013,92:154-169
[3] SADIQ R, HUSAIN T, VEITCH B, et al. Marine water quality assessment of synthetic-based drilling waste discharges[J]. International Journal of Environmental Studies,2003,60(4):313-323
[4] WARNER D L, MCCONNELL C L. Assessment of environmental implications of abandoned oil and gas wells[J]. Journal of Petroleum Technology,1993,45(9):874-880
[5] BENKA-COKER M O, OLUMAGIN A. Effects of waste drilling fluid on bacterial isolates from a mangrove swamp oilfield location in the Niger Delta of Nigeria[J]. Bioresource Technology,1996,55(3):175-179
[6] BALL A S, STEWART R J, SCHLIEPHAKE K. A review of the current options for the treatment and safe disposal of drill cuttings[J]. Waste Management & Research,2012,30(5):457-473
[7] 邓皓,谢水祥,王蓉沙,等.含油钻屑高效除油剂及除油机理研究[J].环境工程学报,2013,7(9):3607-3612
[8] SMITH C J, DELAUNE R D, PATRICK W H, et al. Impact of dispersed and undispersed oil entering a Gulf Coast salt marsh[J]. Environmental Toxicology and Chemistry,1984,3(4):609-616
[9] KNIGHT R L, KADLEC R H, OHLENDORF H M. The use of treatment wetlands for petroleum industry effluents[J]. Environmental Science & Technology,1999,33(7):973-980
[10] JI G D, YANG Y S, ZHOU Q, et al. Phytodegradation of extra heavy oil-based drill cuttings using mature reed wetland:an in situ pilot study[J]. Environment international,2004,30(4):509-517
[11] KOGBARA R B, AYOTAMUNO J M, ONUOMAH I, et al. Stabilisation/solidification and bioaugmentation treatment of petroleum drill cuttings[J]. Applied Geochemistry,2016,71:1-8
[12] CONNER J R, HOEFFNER S L. A critical review of stabilization/solidification technology[J]. Critical Reviews in Environmental Science and Technology,1998,28(4):397-462
[13] KOGBARA R B. A review of the mechanical and leaching performance of stabilized/solidified contaminated soils[J]. Environmental Reviews,2013,22(1):66-86
[14] MOSTAVI E, ASADI S, UGOCHUKWU E. Feasibility study of the potential use of drill cuttings in concrete[J]. Procedia Engineering,2015,118:1015-1023
[15] KHANPOUR R, SHEIKHI-KOUHSAR M R, ESMAEILZADEH F, et al. Removal of contaminants from polluted drilling mud using supercritical carbon dioxide extraction[J]. The Journal of Supercritical Fluids,2014,88:1-7
[16] GOODARZNIA I, ESMAEILZADEH F. Treatment of oil-contaminated drill cuttings of South Pars gas field in Iran using supercritical carbon dioxide[J]. Iranian Journal of Science & Technology Transaction B Engineering,2006,30(5):607-611
[17] PETRI I, PEREIRA M S, DOS Santos J M, et al. Microwave remediation of oil well drill cuttings[J]. Journal of Petroleum Science and Engineering,2015,134:23-29
[18] ROBINSON J P, KINGMAN S W, SNAPE C E, et al. Remediation of oil-contaminated drill cuttings using continuous microwave heating[J]. Chemical Engineering Journal,2009,152(2/3):458-463
[19] ROBINSON J P, SNAPE C E, KINGMAN S W, et al. Thermal desorption and pyrolysis of oil contaminated drill cuttings by microwave heating[J]. Journal of Analytical & Applied Pyrolysis,2008,81(1):27-32
[20] FALCIGLIA P P, MADDALENA R, MANCUSO G, et al. Lab-scale investigation on remediation of diesel-contaminated aquifer using microwave energy[J]. Journal of Environmental Management,2016,167:196-205
[21] SCHMIDT H, KAMINSKY W. Pyrolysis of oil sludge in a fluidised bed reactor[J]. Chemosphere,2001,45(3):285-290
[22] LIU J, JIANG X, HAN X. Devolatilization of oil sludge in a lab-scale bubbling fluidized bed[J]. Journal of Hazardous Materials,2011,185(2/3):1205-1213
[23] NTUKIDEM J, OMONIGHO R, ANIGHORO S. Thermal desorption as an alternative to cutting reinjection in Niger Delta waste management operations.//SPE Annual Technical Conference and Exhibition,San Antonio,Texas, September 29-October 2,2002[C].Texas:Society of Petroleum Engineers,2002
[24] ZUPAN T, KAPILA M. Thermal desorption of drill muds and cuttings in Ecuador:The environmental and financially sound solution.//SPE International Conference on Health, Safety and Environment in Oil and Gas Exploration and Production, Stavanger, Norway, June 26-28,2000[C].Texas:Society of Petroleum Engineers,2000
[25] SHEN L, ZHANG D K. An experimental study of oil recovery from sewage sludge by low-temperature pyrolysis in a fluidised-bed[J]. Fuel,2003,82(4):465-472
[26] SINA ĞA, GÜLBAY S, USKAN B, et al. Production and characterization of pyrolytic oils by pyrolysis of waste machinery oil[J]. Journal of Hazardous Materials,2010,173(1/2/3):420-426
[27] KOUFOPANOS C A, PAPAYANNAKOS N, MASCHIO G, et al. Modelling of the pyrolysis of biomass particles. Studies on kinetics, thermal and heat transfer effects[J]. The Canadian Journal of Chemical Engineering,1991,69(4):907-915