[1] 赵乐乐, 冯伟, 缪静. 城镇污泥处理技术应用现状及发展趋势[J]. 广州化工, 2016, 44(5): 35 − 36. doi: 10.3969/j.issn.1001-9677.2016.05.013
[2] 刘流, 李军. 城镇自来水厂污泥和污水处理厂污泥联合处理处置[J]. 净水技术, 2015, 34(S1): 20 − 22. doi: 10.3969/j.issn.1009-0177.2015.z1.004
[3] 张芳. 关于城市污水厂污泥的处理处置与综合利用的思考[J]. 生态环境与保护, 2021, 3(11): 120 − 121. doi: 10.12238/eep.v3i11.1112
[4] 尹建坤, 冀志国. 城市污水处理后污泥资源化有效利用的研究[J]. 皮革制作与环保科技, 2021, 2(10): 99 − 100.
[5] 侯保林, 任伯帜, 陈文文, 等. 城市污水厂污泥制作蒸压加气混凝土砌块的试验研究[J]. 南华大学学报:自然科学版, 2012, 26(1): 98 − 102.
[6] YU L, HUANG J, LI Y, et al. Electrochemical performance of low-temperature solid oxide fuel cells running on syngas from pyrolytic urban sludge[J]. Ceramics International, 2021, 47(12): 16956 − 16963. doi: 10.1016/j.ceramint.2021.02.268
[7] 郑小艳. 污泥热解气化残渣物化结构演变特性及其吸附性能的实验研究[D]. 杭州: 浙江工业大学, 2015.
[8] 谭明照, 武卫权, 马彩凤. 污泥热解气化的工程化应用研究及思考[J]. 区域治理, 2019(7): 81. doi: 10.3969/j.issn.2096-4595.2019.07.073
[9] WALCZAK P, MAŁOLEPSZY J, REBEN M, et al. Utilization of waste glass in autoclaved aerated concrete[J]. Procedia Engineering, 2015, 122: 302-309.
[10] YANG J, SHI Y, YANG X, et al. Durability of autoclaved construction materials of sewage sludge–cement–fly ash–furnace slag[J]. Construction and Building Materials, 2013, 48: 398 − 405. doi: 10.1016/j.conbuildmat.2013.07.018
[11] SONG Y, LI B, YANG E, et al. Feasibility study on utilization of municipal solid waste incineration bottom ash as aerating agent for the production of autoclaved aerated concrete[J]. Cement and Concrete Composites, 2015, 56: 51 − 58. doi: 10.1016/j.cemconcomp.2014.11.006
[12] MA B G, CAI L X, LI X G, et al. Utilization of iron tailings as substitute in autoclaved aerated concrete: physico-mechanical and microstructure of hydration products[J]. Journal of Cleaner Production, 2016, 127: 162 − 171. doi: 10.1016/j.jclepro.2016.03.172
[13] 尹祥国, 汪丽娟, 张龙, 等. 利用砂和粉煤灰作为混合硅质材料制备砂加气混凝土的试验研究[J]. 新型建筑材料, 2019, 46(11): 66 − 68. doi: 10.3969/j.issn.1001-702X.2019.11.017
[14] 陶友生, 王柏彰. 蒸压加气混凝土砌块生产[M]. 北京: 中国建材工业出版社, 2018.
[15] 林子增, 孙克勤. 城市污泥为部分原料制备黏土烧结普通砖[J]. 硅酸盐学报, 2010, 38(10): 1963 − 1968.
[16] 李淑展, 施周, 谢敏. 污水厂污泥制地砖及其性能[J]. 硅酸盐学报, 2007, 35(2): 251 − 254. doi: 10.3321/j.issn:0454-5648.2007.02.025
[17] RUDCHENKO D, DYUZHILOVA N, SERDYUK V. The assessment of efficiency of blast-furnace granulated slag used in autoclaved aerated concrete manufacturing[J]. Bulletin of Odessa State Academy of Civil Engineering and Architecture, 2020(79): 117 − 125. doi: 10.31650/2415-377X-2020-79-117-125
[18] TIKALSKY P J, POSPISIL J, MACDONALD W. A method for assessment of the freeze–thaw resistance of preformed foam cellular concrete[J]. Cement and Concrete Research, 2004, 34(5): 889 − 893. doi: 10.1016/j.cemconres.2003.11.005
[19] JERMAN M, KEPPERT M, VÝBORNÝ J, et al. Hygric, thermal and durability properties of autoclaved aerated concrete[J]. Construction and Building Materials, 2013, 41: 352 − 359. doi: 10.1016/j.conbuildmat.2012.12.036
[20] REGINA K D, IRENA L, KRISTINA B, et al. Utilization of sewage sludge-biomassgasification residue in cement-based materials: effect of pozzolant type[J]. Environmental Technology, 2017, 39(12): 2937 − 2950.
[21] 程娟, 楼映珠, 杨飞, 等. 掺污水处理厂剩余污泥对新拌水泥基材料性能的影响[J]. 甘肃水利水电技术, 2018, 54(9): 9 − 12. doi: 10.19645/j.issn2095-0144.2018.09.003