[1] |
Kresge C T, Leonowicz M E, Roth W J, et al. Ordered mesoporous molecular sieves synthesized by a liquid-crystal template mechanism[J]. Nature,1992,359:710-712
|
[2] |
Zhang A J, Li Z H, Li Z C, et al. Effects of different Ti-doping methods on the structure of pure-silica MCM-41 mesoporous materials[J]. Applied Surface Science, 2008, 254:6298-6304
|
[3] |
Kong Y, Jiang S Y, Wang J, et al. Synthesis and characterization of Cu-Ti-MCM41[J]. Microporous and Mesoporous Materials, 2005, 86: 191-197
|
[4] |
Wang G J, Wang Y R, Liu Y W, et al. Synthesis of highly regular mesoporous Al-MCM-41 from metakaolin[J]. Applied Clay Science, 2009, 44:185-188
|
[5] |
Parida K M, Dash Suresh K. Adsorption of Cu2+ on spherical Fe-MCM-41 and its application for oxidation of adamantine[J]. Journal of Hazardous Materials, 2010, 179:642-649
|
[6] |
Eswaramoorthi I, Sundaramurthy V, Lingappan N. Hydroisomerisation of C6-C7 n-alkanes over Pt loaded zirconium containing Al-MCM-41 molecular sieves[J]. Microporous and Mesoporous Materials, 2004, 71:109-115
|
[7] |
Pîrvulescu V, Anastasescu C, Su B L. Bimetallic Ru-(Cr, Ni, or Cu) and La-(Co or Mn) incorporated MCM-41 molecular sieves as catalysts for oxidation of aromatic hydrocarbons[J]. Journal of Molecular Catalysis A: Chemical, 2004, 211:143-148
|
[8] |
Vinu A, Nandhini K.U. Murugesan V, et al. Mesoporous FeAlMCM-41: an improved catalyst for the vapor phase tert-butylation of phenol[J]. Applied Catalysis A: General, 2004, 265:1-10
|
[9] |
Zhan W C, Guo Y L, Wang Y Q, et al. Synthesis of lanthanum-doped MCM-48 molecular sieves and its catalytic performance for the oxidation of styrene[J]. Journal of Physical Chemistry B, 2007, 111:12103-12110
|
[10] |
Ma J, Qin Q D, Liu K. Adsorption of nitrobenzene from aqueous solution by MCM-41[J]. Journal of Colloid and Interface Science, 2007, 315:80-86
|
[11] |
Sepehrian H, Fasihi J, Khayatzadeh Mahani M. Adsorption behavior studies of picric acid on mesoporous MCM-41[J]. Industrial & Engineering Chemistry Research, 2009, 48:6772-6775
|
[12] |
Benhamou A, Baudu M, Derriche Z, et al. Aqueous heavy metals removal on amine-functionalized Si-MCM-41 and Si-MCM-48[J]. Journal of Hazardous Materials, 2009, 171:1001-1008
|
[13] |
Sui M H, Liu J, Sheng L. Mesoporous material supported manganese oxides (MnO<em>x/MCM-41) catalytic ozonation of nitrobenzene in water[J]. Applied Catalysis B: Environmental, 2011, 106:195-203
|
[14] |
Zhao Q, Xu Y H, Li Y H, et al. Effect of the Si/Ce molar ratio on the textural properties of rare earth element cerium incorporated mesoporous molecular sieves obtained room temperature[J]. Applied Surface Science, 2009, 255:9425-9429
|
[15] |
Boutros M, Launay F, Nowicki A, et al. Reduced forms of Rh(Ⅲ) containing MCM-41 silicas as hydrogenation catalysts for arene derivatives[J]. Journal of Molecular Catalysis A: Chemical, 2006, 259:91-98
|
[16] |
Zhan W C, Lu G Z, Guo Y L, et al. Synthesis of Ln-doped MCM-41 mesoporous materials and their catalytic performance in oxidation of styrene[J]. Journal of Rare Earths, 2008, 26:59-65
|
[17] |
Dai Q G, Wang X Y, Chen G P, et al. Direct synthesis of cerium(Ⅲ)-incorporated SBA-15 mesoporous molecular sieves by two-step synthesis method[J]. Microporous and Mesoporous Materials, 2007, 100:268-275
|
[18] |
王幸宜,催化剂表征[M]. 上海:华东理工大学出版社,2008:169-177
|