电化学氧化法处理模拟黄连素制药废水的研究
Treatment of simulated berberine wastewater in electrochemical process
-
摘要: 以RuO2/Ti为阳极,研究了电化学氧化法对黄连素制药废水的处理效果。通过比较在KCl与K2SO4 2种支持电解质体系中的处理效果,同时考察了电流强度、初始pH、电解质浓度和电极间距等因素对废水中黄连素及COD去除率的影响,明确了电化学原位生成活性氯是黄连素降解的主要原因;确定了电流强度、pH、电解质浓度和电极间距等最优工艺条件,取得了黄连素和COD的去除率分别高达95%和60%以上的实验结果,以及电化学处理黄连素废水的能耗,为黄连素制药废水电化学处理的工业化应用提供了科学依据。Abstract: Electrochemical treatment of simulated berberine wastewater with RuO2/Ti electrode as anode was investigated. Firstly, the treatment efficiencies were compared by using KCl and K2SO4 as supporting electrolytes separately, and then the effects of current intensity, initial pH, electrolyte concentration and electrode distance on the degradation of berberine and COD were studied in detail. The results showed that the removal efficiencies were much better in KCl system than K2SO4 system and the mechanism of berberine degradation was related to the electro-generation of active chlorine. Meanwhile, the optimal experimental conditions were obtained with the berberine and COD removal efficiencies reaching above 95% and 60%, respectively. Eventually, the energy costs were analyzed. Above all, it was necessary to provide some scientific basis for the practical application on the treatment of berberine pharmaceutical wastewater.
-
Key words:
- berberine /
- pharmaceutical wastewater /
- electrochemical process /
- RuO2/Ti anode /
- active chlorine
-
-

计量
- 文章访问数: 2108
- HTML全文浏览数: 948
- PDF下载数: 1279
- 施引文献: 0