奥贝尔氧化沟工艺中异养菌动力学参数测定与分析

杨侃; 刘玉玲; 马昭

doi:10.12030/j.cjee.20151018

环境工程学报

奥贝尔氧化沟工艺中异养菌动力学参数测定与分析

, ,

杨侃, 刘玉玲, 马昭. 奥贝尔氧化沟工艺中异养菌动力学参数测定与分析[J]. 环境工程学报, 2015, 9(10): 4731-4734. doi: 10.12030/j.cjee.20151018

引用本文:

杨侃, 刘玉玲, 马昭. 奥贝尔氧化沟工艺中异养菌动力学参数测定与分析[J]. 环境工程学报, 2015, 9(10): 4731-4734. doi: 10.12030/j.cjee.20151018

Yang Kan, Liu Yuling, Ma Zhao. Determination of kinetic parameters of heterotrophic bacteria of an Orbal oxidation ditch[J]. Chinese Journal of Environmental Engineering, 2015, 9(10): 4731-4734. doi: 10.12030/j.cjee.20151018

Citation:

Yang Kan, Liu Yuling, Ma Zhao. Determination of kinetic parameters of heterotrophic bacteria of an Orbal oxidation ditch[J]. Chinese Journal of Environmental Engineering, 2015, 9(10): 4731-4734. doi: 10.12030/j.cjee.20151018

奥贝尔氧化沟工艺中异养菌动力学参数测定与分析

1.
西安理工大学水利水电学院
2.
西北旱区生态水利工程国家重点实验室, 西安 710048
基金项目:
国家自然科学基金资助项目(51178391)

陕西省科学研究计划项目(2014K15-03-05)

陕西省教育厅重点实验室科学研究计划项目(15JS063)
中图分类号: X703.1

Determination of kinetic parameters of heterotrophic bacteria of an Orbal oxidation ditch

1.
Institute of Water Resources and Hydro-electric Engineering, Xi'an University of Technology
2.
State Key Laboratory of Eco-Hydraulic Engineering, Xi'an, Shaanxi 710048, China
Fund Project:

摘要: 以西安市某污水处理厂奥贝尔氧化沟工艺为研究对象,运用呼吸计量法测试了该污水厂氧化沟内异养菌的产率系数、衰减系数和最大比增长速率参数值,并与ASM1推荐值比较分析认为,本实验测试结果可靠,更符合该污水处理厂的实际情况,并能为后续精确模拟和优化该厂工艺运营奠定基础。
- 异养菌 /
- 动力学参数 /
- 呼吸计量法
Abstract: An Orbal oxidation ditch of wastewater treatment plant in Xian city was taken as the research object.The production coefficient,attenuation coefficient and the maximum specific growth rate of heterotrophic bacteria in the Orbal oxidation ditch were determined by the respiratory measurement method,and the measurements were compared with the recommended values of ASM1 at 20℃.Results showed that the testing results were reliable,and were more in line with the actual situation of the sewage treatment plant.The testing results can provide a useful reference for the subsequent accurate simulation and optimization of running for the sewage treatment plant.
- heterotrophic /
- kinetic parameter /
- respiratory measurement

[1]	张自杰.排水工程(下册)(第4版).北京:中国建筑工业出版社,2000
[2]	孙培德,宋英琦,王如意.活性污泥动力学模型及数值模拟导论.北京:化学工业出版社,2010
[3]	游桂林,樊杰.呼吸计量法测定安庆市城东污水厂污泥特性参数.环境科学与技术,2009,32(7):144-147You Guilin,Fan Jie.Determination of activated sludge characteristics used in ASM1 by respirometry.Environmental Science & Technology,2009,32(7):144-147(in Chinese)
[4]	高扬,邵青.基于ASM2D模型对龙王嘴污水处理厂的工艺模拟.给水排水,2014,40(2):117-121Gao Yang,Shao Qing.Simulation of the process in Longwangzui wastewater treatment plant using ASM2D model.Water & Wastewater Engineering,2014,40(2):117-121(in Chinese)
[5]	薛涛,俞开昌,关晶,等.MBR污水处理工艺中活性污泥动力学参数测定.环境科学,2011,32(4):1027-1033Xue Tao,Yu Kaichang,Guan Jing,et al.Determination of kinetic parameters of activated sludge in an MBR wastewater treatment plant.Environmental Science,2011,32(4):1027-1033(in Chinese)
[6]	Vanrolleghem P.A.,Verstraete W.Simultaneous biokinetic characterization of heterotrophic and nitrifying populations of activated sludge with an on-line respiregraphic biosensor.Water Science and Technology,1993,28(11-12):377-387
[7]	Brands E.,Liebeskind M.,Dohmann M.Parameters for dynamic simulation of wastewater treatment plants with high-rate and low-rate activated sludge tanks.Water Science and Technology,1994,30(4):211-214
[8]	华立娜,赵剑强,毛鹤群,等.呼吸计量法对甲醇和葡萄糖为基质的ASM1参数测定.环境工程学报,2013,7(5):1871-1877Hua Lina,Zhao Jianqiang,Mao Hequn,et al.Determination of parameters in Activated Sludge Model No.1 (ASM1) with respiromietrc method and methanol or glucose as substrate.Chinese Journal of Environmental Engineering,2013,7(5):1871-1877(in Chinese)
[9]	IWA.IWA Task Group on Mathematical Modeling for Design and Operation of Biological Wastewater Treatment,Activated Sludge Models ASM1,ASM2,ASM2 and ASM3.London:IWA,2000
[10]	Oliveira C.S.,Ordaz A.,Ferreira E.C.,et al.In situ pulse respirometric methods for the estimation of kinetic and stoichiometric parameters in aerobic microbial communities.Biochemical Engineering Journal,2011,58-59:12-19

点击查看大图

计量

文章访问数: 1636
HTML全文浏览数: 1350
PDF下载数: 1005
施引文献: 0

奥贝尔氧化沟工艺中异养菌动力学参数测定与分析

1. 西安理工大学水利水电学院
2. 西北旱区生态水利工程国家重点实验室, 西安 710048

收稿日期: 2014-09-03

基金项目:

国家自然科学基金资助项目(51178391)

陕西省科学研究计划项目(2014K15-03-05)

陕西省教育厅重点实验室科学研究计划项目(15JS063)

关键词:

摘要: 以西安市某污水处理厂奥贝尔氧化沟工艺为研究对象,运用呼吸计量法测试了该污水厂氧化沟内异养菌的产率系数、衰减系数和最大比增长速率参数值,并与ASM1推荐值比较分析认为,本实验测试结果可靠,更符合该污水处理厂的实际情况,并能为后续精确模拟和优化该厂工艺运营奠定基础。

English Abstract

Determination of kinetic parameters of heterotrophic bacteria of an Orbal oxidation ditch

1. Institute of Water Resources and Hydro-electric Engineering, Xi'an University of Technology
2. State Key Laboratory of Eco-Hydraulic Engineering, Xi'an, Shaanxi 710048, China

Received Date: 2014-09-03

Fund Project:

Keywords:

Abstract: An Orbal oxidation ditch of wastewater treatment plant in Xian city was taken as the research object.The production coefficient,attenuation coefficient and the maximum specific growth rate of heterotrophic bacteria in the Orbal oxidation ditch were determined by the respiratory measurement method,and the measurements were compared with the recommended values of ASM1 at 20℃.Results showed that the testing results were reliable,and were more in line with the actual situation of the sewage treatment plant.The testing results can provide a useful reference for the subsequent accurate simulation and optimization of running for the sewage treatment plant.

全文HTML

参考文献 (10)

下载: 全尺寸图片幻灯片

返回文章

用微信扫码二维码

分享至好友和朋友圈

奥贝尔氧化沟工艺中异养菌动力学参数测定与分析

Determination of kinetic parameters of heterotrophic bacteria of an Orbal oxidation ditch

计量

出版历程

奥贝尔氧化沟工艺中异养菌动力学参数测定与分析

English Abstract

Determination of kinetic parameters of heterotrophic bacteria of an Orbal oxidation ditch

全文HTML

目录