[1] 张自杰.排水工程(下册)(第4版).北京:中国建筑工业出版社,2000
[2] 孙培德,宋英琦,王如意.活性污泥动力学模型及数值模拟导论.北京:化学工业出版社,2010
[3] 游桂林,樊杰.呼吸计量法测定安庆市城东污水厂污泥特性参数.环境科学与技术,2009,32(7):144-147You Guilin,Fan Jie.Determination of activated sludge characteristics used in ASM1 by respirometry.Environmental Science & Technology,2009,32(7):144-147(in Chinese)
[4] 高扬,邵青.基于ASM2D模型对龙王嘴污水处理厂的工艺模拟.给水排水,2014,40(2):117-121Gao Yang,Shao Qing.Simulation of the process in Longwangzui wastewater treatment plant using ASM2D model.Water & Wastewater Engineering,2014,40(2):117-121(in Chinese)
[5] 薛涛,俞开昌,关晶,等.MBR污水处理工艺中活性污泥动力学参数测定.环境科学,2011,32(4):1027-1033Xue Tao,Yu Kaichang,Guan Jing,et al.Determination of kinetic parameters of activated sludge in an MBR wastewater treatment plant.Environmental Science,2011,32(4):1027-1033(in Chinese)
[6] Vanrolleghem P.A.,Verstraete W.Simultaneous biokinetic characterization of heterotrophic and nitrifying populations of activated sludge with an on-line respiregraphic biosensor.Water Science and Technology,1993,28(11-12):377-387
[7] Brands E.,Liebeskind M.,Dohmann M.Parameters for dynamic simulation of wastewater treatment plants with high-rate and low-rate activated sludge tanks.Water Science and Technology,1994,30(4):211-214
[8] 华立娜,赵剑强,毛鹤群,等.呼吸计量法对甲醇和葡萄糖为基质的ASM1参数测定.环境工程学报,2013,7(5):1871-1877Hua Lina,Zhao Jianqiang,Mao Hequn,et al.Determination of parameters in Activated Sludge Model No.1 (ASM1) with respiromietrc method and methanol or glucose as substrate.Chinese Journal of Environmental Engineering,2013,7(5):1871-1877(in Chinese)
[9] IWA.IWA Task Group on Mathematical Modeling for Design and Operation of Biological Wastewater Treatment,Activated Sludge Models ASM1,ASM2,ASM2 and ASM3.London:IWA,2000
[10] Oliveira C.S.,Ordaz A.,Ferreira E.C.,et al.In situ pulse respirometric methods for the estimation of kinetic and stoichiometric parameters in aerobic microbial communities.Biochemical Engineering Journal,2011,58-59:12-19