<p>垃圾焚烧飞灰重金属元素分析标准样品研制</p>

张覃; 田衎; 岳亚萍; 周裕敏; 房丽萍; 封跃鹏

doi:10.7524/j.issn.0254-6108.2019011504

环境化学

垃圾焚烧飞灰重金属元素分析标准样品研制

, , , , ,

张覃, 田衎, 岳亚萍, 周裕敏, 房丽萍, 封跃鹏. 垃圾焚烧飞灰重金属元素分析标准样品研制[J]. 环境化学, 2019, (12): 2682-2689. doi: 10.7524/j.issn.0254-6108.2019011504

引用本文:

张覃, 田衎, 岳亚萍, 周裕敏, 房丽萍, 封跃鹏.

垃圾焚烧飞灰重金属元素分析标准样品研制

[J]. 环境化学, 2019, (12): 2682-2689. doi: 10.7524/j.issn.0254-6108.2019011504

ZHANG Qin, TIAN Kan, YUE Yaping, ZHOU Yumin, FANG Liping, FENG Yuepeng. Preparation of waste incineration fly ash reference material for analysis of heavy metal elements[J]. Environmental Chemistry, 2019, (12): 2682-2689. doi: 10.7524/j.issn.0254-6108.2019011504

Citation:

ZHANG Qin, TIAN Kan, YUE Yaping, ZHOU Yumin, FANG Liping, FENG Yuepeng.

Preparation of waste incineration fly ash reference material for analysis of heavy metal elements

[J]. Environmental Chemistry, 2019, (12): 2682-2689. doi: 10.7524/j.issn.0254-6108.2019011504

垃圾焚烧飞灰重金属元素分析标准样品研制

环境保护部标准样品研究所国家环境保护污染物计量和标准样品研究重点实验室, 北京, 100029

通讯作者: 房丽萍, E-mail: fang.liping@ierm.com.cn ;

基金项目:
国家标准制修订项目（2016-42）资助.

Preparation of waste incineration fly ash reference material for analysis of heavy metal elements

Institute for Environmental Reference Materials of Ministry of Environmental Protection, State Environmental Protection Key Laboratory of Environmental Pollutant Metrology and Reference Materials, Beijing, 100029, China

Corresponding author: FANG Liping, fang.liping@ierm.com.cn ;

Fund Project: Supported by the National standards revision project of China (2016-42).

摘要:
本文介绍了垃圾焚烧飞灰重金属元素分析标准样品的研制过程.标准样品定值指标为Ag、As、Ba、Be、Cd、Co、Cr、Cu、Hg、Mn、Ni、Pb、Sb、Tl、V、Zn等16种重金属元素.垃圾焚烧飞灰标准样品是一种带有基体的标准样品，原料样品从垃圾焚烧站除尘设施收集，经干燥、过筛、混匀、分装和灭菌等步骤加工处理后，分别采用电感耦合等离子体发射光谱法（ICP-OES）、电感耦合等离子体质谱法（ICP-MS）和原子荧光法（AFS）对标准样品进行了均匀性和稳定性检验.结果显示，样品均匀性和稳定性良好.选择技术水平较高10家权威实验室对16种重金属元素进行协作定值，并进行了不确定度评定，量值评定结果显示该样品中16种元素的含量在0.410-11600 μg·g^-1之间，相对扩展不确定度在4.3%-18%之间.
- 垃圾焚烧飞灰 /
- 标准样品 /
- 重金属 /
- 稳定性 /
- 均匀性 /
- 不确定度
Abstract:
The development process of a waste incineration fly ash reference material (RM) was introduced. Sixteen heavy metal elements, such as Ag, As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mn, Ni, Pb, Sb, Tl, V and Zn were selected as the characteristic values of fly ash reference material. The fly ash RM is a kind of reference material with matrix, which was collected from waste incineration station and dried, screened, mixed, packed and sterilized. The homogeneity and stability were tested with inductively coupled plasma optical emission spectrometry,inductively coupled plasma mass spectrometry and atomic fluorescence spectrometry. It was showed that the homogeneity and stability had good performances. RM measured with a network of 10 laboratories and the uncertainties were evaluated with proper method. Results showed the concentrations of the 16 elements were from 0.410 to 11600 μg·g^-1, and relative expanded uncertainty ranged from 4.3% to 18%.
- waste incineration fly ash /
- reference material /
- heavy metal /
- stability /
- homogeneity /
- uncertainty

[1]	李润东,聂永丰,王雷,等.垃圾焚烧飞灰中重金属和二英等痕量污染物分析[J].燃烧科学与技术,2004,10(6):479-483. LI Y D, NIE Y F, WANG L et al. Trace pollutant in MSW incinerator fly ash:Heavy metals and dioxins[J]. Journal of Combustion Science and Technology. 2004,10(6):479-483(in Chinese).
[2]	国家环境保护总局,国家质量监督检验检疫总局.GB 18484危险废物焚烧污染控制标准[S].北京:中国环境科学出版社,2001. Ministry of environmental protection, Administration for quality supervision and inspection and quarantine. GB 18484. Pollution control standard for hazardous waste incineration[S]. Beijing:China Environmental Science Press, 2001(in Chinese).
[3]	环境保护部,国家质量监督检验检疫总局.GB 18485-2014生活垃圾焚烧污染控制标准[S].北京:中国环境科学出版社.2014. Ministry of environmental protection, Administration for quality supervision and inspection and quarantine. GB 18485-2014.Standard for pollution control on the municipal solid waste incineration[S]. Beijing:China Environmental Science Press,2014 (in Chinese).
[4]	符鑫杰,李涛,班允鹏,等.垃圾焚烧技术发展综述[J].中国环保产业,2018,8:56-59. FU X J, LI T, BAN Y P et al.Overview on technical development of refuse incineration[J]. China Environmental Protection Industry, 2018 ,8:56-59(in Chinese).
[5]	黄林艳,刘海萍,赵亚娴,等.环境基质有机标准样品研究进展[J].环境化学,2017,36(10):2115-2125. HUANG L Y, LIU H P, ZHAO Y X, et al. Research progress on environmental matrix organic reference materials[J]. Environmental Chemistry, 2017,36(10):2115-2125(in Chinese).
[6]
[7]	曹丹丹,田文,封跃鹏,等.土壤中有机氯农药残留分析用标准样品的制备[J].色谱,2010,28(5):483-486. CAO D D, TIAN W, FENG Y P et al. Preparation of soil candidate reference materials for analysis of organo-chlorine pesticides in soils[J]. Chinese Journal of Chromatography, 2010,28(5):483-486(in Chinese).
[8]	刘妹,顾铁新,潘含江,等.泛滥平原沉积物标准物质研制[J].岩矿测试,2018,37(5):558-571. LIU M, GU T X, PAN H J, et al. Preparation of seven certified reference materials for floodplain sediments[J]. Rock and Mineral Analysis, 2018,37(5):558-571(in Chinese).
[9]	张蕊.多环芳烃大气PM_2.5基体标准样品的均匀性检测和稳定性考核研究[J].环境科学与管理,2018,43(1):152-154. ZHANG R. Homogeneity test and stability assessment of PM_2.5 PAHs[J]. Environmental science and management, 2018,43(1):152-154(in Chinese).
[10]	United State Environmental Protection Agency. EPA Method 3052 Microwave assisted acid digestion of siliceous and organically based matrices[S].1996.
[11]	环境保护部.HJ 702-2014固体废物汞、砷、硒、铋、锑的测定微波消解/原子荧光法[S]. 北京:中国环境科学出版社,2014. Ministry of environmental protection. Solid Waste-Determination of Mercury, Arsenic, Selenium, Bismuth, Antimony-Microwave Dissolution/Atomic Fluorescence Spectrometry[S]. Beijing:China Environmental Science Press,2014(in Chinese).

点击查看大图

计量

文章访问数: 2084
HTML全文浏览数: 2084
PDF下载数: 39
施引文献: 0

垃圾焚烧飞灰重金属元素分析标准样品研制

通讯作者: 房丽萍, E-mail: fang.liping@ierm.com.cn ;

环境保护部标准样品研究所国家环境保护污染物计量和标准样品研究重点实验室, 北京, 100029

收稿日期: 2019-01-15
网络出版日期: 2019-12-10

基金项目:

国家标准制修订项目（2016-42）资助.

关键词:

摘要:

本文介绍了垃圾焚烧飞灰重金属元素分析标准样品的研制过程.标准样品定值指标为Ag、As、Ba、Be、Cd、Co、Cr、Cu、Hg、Mn、Ni、Pb、Sb、Tl、V、Zn等16种重金属元素.垃圾焚烧飞灰标准样品是一种带有基体的标准样品，原料样品从垃圾焚烧站除尘设施收集，经干燥、过筛、混匀、分装和灭菌等步骤加工处理后，分别采用电感耦合等离子体发射光谱法（ICP-OES）、电感耦合等离子体质谱法（ICP-MS）和原子荧光法（AFS）对标准样品进行了均匀性和稳定性检验.结果显示，样品均匀性和稳定性良好.选择技术水平较高10家权威实验室对16种重金属元素进行协作定值，并进行了不确定度评定，量值评定结果显示该样品中16种元素的含量在0.410-11600 μg·g^-1之间，相对扩展不确定度在4.3%-18%之间.

English Abstract

Preparation of waste incineration fly ash reference material for analysis of heavy metal elements

Corresponding author: FANG Liping, fang.liping@ierm.com.cn ;

Institute for Environmental Reference Materials of Ministry of Environmental Protection, State Environmental Protection Key Laboratory of Environmental Pollutant Metrology and Reference Materials, Beijing, 100029, China

Received Date: 2019-01-15
Available Online: 2019-12-10

Fund Project: Supported by the National standards revision project of China (2016-42).

Keywords:

Abstract:

The development process of a waste incineration fly ash reference material (RM) was introduced. Sixteen heavy metal elements, such as Ag, As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mn, Ni, Pb, Sb, Tl, V and Zn were selected as the characteristic values of fly ash reference material. The fly ash RM is a kind of reference material with matrix, which was collected from waste incineration station and dried, screened, mixed, packed and sterilized. The homogeneity and stability were tested with inductively coupled plasma optical emission spectrometry,inductively coupled plasma mass spectrometry and atomic fluorescence spectrometry. It was showed that the homogeneity and stability had good performances. RM measured with a network of 10 laboratories and the uncertainties were evaluated with proper method. Results showed the concentrations of the 16 elements were from 0.410 to 11600 μg·g^-1, and relative expanded uncertainty ranged from 4.3% to 18%.